News, guides and event coverage
Additive manufacturing, covered from nozzle to expo floor
3D Printing Event follows the printers, materials, techniques and post-processing that makers and manufacturing teams actually work with, plus the industry events where the next wave gets shown.
Fresh off the build plate
Latest coverage
Glow in the Dark Filament Printing Tips to Try in 2026
Learn glow in the dark filament printing tips for : smoother layers, stronger glow, fewer jams, and reliable results on any desktop…
Metal Filled Filament Printing and Polishing (2026)
Learn metal filled filament printing and polishing in : nozzle choice, flow settings, sanding grits, tumbling, and dust-safe finishing steps for FDM…
How to Print With Wood Filled Filament: Easy Guide (2026)
How to print with wood filled filament without clogs: nozzle choice, drying, temperature, slicing settings and fixes for stringing and poor adhesion.
How to Use Up Filament Scraps and Short Rolls: Easy Ideas 2026
Learn how to use up filament scraps and short rolls in with practical small prints, prototypes, calibration tests, colorful projects, and…
How to Fix Tangled Filament on a Spool: Simple Steps (2026)
Learn how to fix tangled filament on a spool safely, loosen tight wraps, remove stubborn knots and stop future tangles. Simple steps,…
How to Splice Filament for Continuous Printing Safely (2026)
Learn how to splice filament for continuous printing in : match materials, form a strong round seam, test the joint, and install…
How to Estimate Filament Needed for a Project (2026)
Learn how to estimate filament needed for a project with bounding box math, slicer gram readings, density conversions and a waste buffer.…
How to Reduce Print Time and Material Cost: Proven Tips 2026
Learn how to reduce print time and material cost in with practical slicer, orientation, shell, infill, support and speed changes, without ruining…
How to Make Parametric Models for Customization (2026)
Learn how to make parametric models for customization in CAD: define parameters, build constrained geometry, test ranges, and export STEP or 3MF…
Where to start
Browse by topic
Editor’s note
If you build a part one layer at a time, you already know how fast this field moves: a new printer, a new material, a cleaner way to finish a surface. We follow the releases, the spec sheets and the show-floor announcements so you can spend more of your time at the machine.
Read in whatever order suits the job in front of you. The newest work always sits at the top of this page.
The 3D Printing Event editors
About
Written for the workbench
3D Printing Event is built for makers, engineers, designers and manufacturing professionals: printer and material coverage, technique and post-processing guides, and reporting from the industry’s events and expos.